TOSHIBA TECRA A10-1HR Laptop Keyboard, TECRA A10-1HR keyboards
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1HR
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1HR
![]() Click for more pictures |
||
|
||
Keyboards for TOSHIBA TECRA A10-1HR
![]() Click for more pictures |
||
|
||
TOSHIBA TECRA A10-1HR keyboards tags: Satellite M2 , Satellite S3. , Satellite 2435 , Satellite A60 , Satellite M3 , Satellite M1 , Satellite A60 , Satellite A1135 laptop keyboard , Tecra M9-S551 laptop keyboard , Satellite S205 , Satellite A60 , Satellite P25 , Satellite A30 laptop keyboard , Satellite 2410 , Equium M70 , Satellite A115 , Satellite S1 laptop keyboard , Satellite S1 laptop keyboard , Satellite 2430 laptop keyboard , Equium A60 , Satellite A115 , Satellite 2430 , Satellite A8 , Satellite M7 , Qosmio F25 , Satellite M55 laptop keyboard , Satellite M7 laptop keyboard , Equium A70 laptop keyboard
Our keyboards are original from the keyboard manufacturer, We provide 100% genuine and brand new keyboard to replace your TOSHIBA TECRA A10-1HR keyboard. We back each purchase with a 100% Satisfaction Guarantee, so buy with confidence.
Your attention please:
Please firstly compare the picture with your TOSHIBA TECRA A10-1HR keyboard before you place an order, especially the ribbon cable (position, length and width). Make sure that the model of laptop and part number of TECRA A10-1HR keyboard is the right one you need as well as the layout version. If you are still not sure after a comparation, or want to know more about the TOSHIBA TECRA A10-1HR laptop keyboard, please contact us.
TOSHIBA TECRA A10-1HR notebook keyboard installation notice:
- To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the laptop computer.
- The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the TECRA A10-1HR keyboard.
- Before securing the latch on the system board connector, ensure that the TOSHIBA TECRA A10-1HR laptop keyboard connector is seated and the tabs on the connector are properly aligned with the slots on the system board connector. Failure to align the tabs could result in a malfunction of the laptop or damage to the cable and/or the cable connector.
New TOSHIBA Laptop Keyboard 
![]() TOSHIBA C40-B, C40d-B laptop keyboards |
![]() TOSHIBA C50-B, C50D-B laptop keyboards |
![]() TOSHIBA L45-B, L40-B laptop keyboards |
![]() TOSHIBA CB35, CB30 laptop keyboards |
![]() TOSHIBA A50-A, W50-A laptop keyboards |





















